Introduction
Installing Windows 11 can seem like a daunting task, especially if you’re new to the process. However, using a how to install windows 11 from usb USB to perform a fresh installation is one of the easiest and most efficient ways to get started. This guide will walk you through the entire process step by step, breaking it down into manageable pieces so even beginners can install Windows 11 with confidence.
By the end of this blog, you’ll know how to create a bootable USB drive, configure your PC for installation, and install Windows 11 seamlessly.
Step 1 – Check System Requirements
Before installing Windows 11, make sure your computer meets the minimum system requirements. Here’s a quick checklist to verify compatibility:
• Processor: 1 gigahertz (GHz) or faster, with at least two cores.
• RAM: 4GB or more.
• Storage: 64GB or larger storage device.
• System Firmware: UEFI, secure boot capable.
• TPM: Version 2.0.
• Display: HD display (720p), 9-inch diagonal or larger.
To check these, you can refer to your system’s settings or use diagnostic tools built into your operating system.
Step 2 – Create a Bootable USB Drive
You’ll need a USB drive with at least 8GB of storage to install Windows 11. Follow these steps to create a bootable USB drive:
1. Download the Windows 11 ISO File
Use the official source to download the ISO file for Windows 11. Ensure you’ve chosen the correct version or edition you need.
2. Use Bootable USB Creation Software
Use software tools like Media Creation Tool to create a bootable USB. These tools are beginner-friendly and will guide you through the process.
3. Insert the USB and Format
Plug your USB drive into the computer and ensure it’s formatted as FAT32 or NTFS. The tool will handle this automatically, but formatting beforehand ensures seamless operation.
4. Load the Windows ISO File
Open the tool, select the ISO file, and load it onto the USB drive following the on-screen steps.
Step 3 – Configure Your PC for Installation
Once your bootable USB drive is ready:
1. Restart your computer and enter the BIOS/UEFI Settings. This is usually done by pressing a designated key like F2 or DEL during startup.
2. Change the Boot Order to prioritize booting from the USB drive. Save and exit the settings.
Step 4 – Install Windows 11
1. Plug the USB into your computer and restart it.
2. The computer should boot from the USB automatically, launching the Windows 11 installer.
3. Follow the on-screen prompts to select language, time, and keyboard preferences.
4. Choose “Install Now” and input your Windows 11 product key.
5. Select the installation type. For a clean install, select Custom Install and choose the partition where you want Windows 11.
6. The installation process will begin, and your computer will automatically restart several times during the process.
Final Configurations
After the installation is complete, you’ll need to set up your new Windows 11 system:
• Create a user account.
• Connect to your Wi-Fi network.
• Apply system updates if available.
From here, you can personalize your new Windows 11 as needed.
Wrapping Up
Installing Windows 11 via a USB drive is simpler than it may seem, especially with the right guidance. Following this step-by-step guide ensures a smooth installation, even if you’re a beginner. Once set up, take some time to explore the new features and interface that Windows 11 has to offer.